Can High-Power GPS Jammers Shield Family Cars?
GPS jammers are designed to prevent antenna mining errors only when the correct antenna can be inserted. (Note: If you do not install the antenna to turn on the power switch, the machine may be damaged.) Power connection Check the power switch of the host, make sure the power switch is in the off position, and carry anti-vibration devices. Insert the output plug of the power transformer into the host on the left side of the power socket to switch power. The compressor input plug is connected to a 220V AC power supply. High-power GPS jammer/car GPS location jammer/WIFI shielding Bluetooth suppressor can also become your family car! Network information leakage detector (electromagnetic conductive interference), triple test shield for mobile phone signal shielding device + wireless LAN network shield!
Portable suppressor UHF broadband interference technology The core technology (single frequency band) of this technology includes two functional ICs and their peripheral matching circuits. VCO (commonly known as interference source): Inverter, actually a voltage-frequency conversion device, it needs to change the output of the phase difference voltage signal to frequency change PA (power amplifier): Since the internal power amplifier is driven by power, the power amplifier, detection It is composed of components such as high frequency rectification, power detection, error voltage amplification * mobile phone signal installation method * can be used in cars. The product can be screwed directly into walls and ceilings, and the surface temperature of the product can reach 50°C, so please stay away from low-heat objects.
GPS jammer installation process and method Take out the shielding cover from the packing box. The antenna is screwed into the corresponding antenna board, otherwise it is invalid. The shielding layer hanging on the wall or corresponding position should be installed at a height of 1-2 meters; first make sure that the shielding layer host is fully charged, then turn on the switch and start working. Turn on the indicator light. This protective cover is a maintenance-free device and does not require maintenance . Use chemical solvents to wipe the surface of the drone's control device and avoid inhalation. If the protective cover is useful, store it in a dry, well-ventilated place to avoid prolonged exposure to salt spray and harmful gases.