Cell Phone Blocker Legal In Canada
If Cell Phone Blocker Legal In Canada During installation, due to the limitation of the site installation environment, the power adapter cannot be translated more than 20cm laterally. The compromise method is to place the power adapter under the mainframe of the mobile phone jammer. After adopting this method, the power adapter There will still be some interference from the strong magnetic field of the mobile phone jammer host, but the interference will be less compared to the power adapter close to both sides of the host. cell phone jammer When using wall-mounted installation, please pay special attention that there should be no strong current lines around the antenna of the mobile phone jammer (including the left and right sides of the antenna, above the antenna, and the strong dark wires embedded in the wall where the antenna is located). Electric lines refer to open or dark wires usually laid on the wall, which are 220V or 380V alternating current lines. The strong current line also includes the 220V power cord that supplies power to the mobile phone jammer itself.
If the Cell Phone Blocker Legal In Canada installation location must pass through the pre-arranged strong current pipeline, please modify this pipeline to a U shape to bypass the mobile phone jammer host and antenna location. It is generally recommended to place the strong current line at a certain distance below the mainframe of the mobile phone signal jammer. The power adapter is 220V AC to 5V DC (depending on the mobile phone jammer model, the output DC voltage of different models is not the same) to power the mobile phone jammer host, the power adapter must be placed at least 20cm away from the mobile phone jammer host Location, otherwise, the strong magnetic field from the host and antenna will reduce the output voltage of the adapter, affect the normal operation of the mobile phone signal jammer host, resulting in poor shielding effect